JVC Camcorder TK C751 User Manual

®
For Customer Use:  
Enter below the Serial No. which is located on the body.  
COLOR VIDEO CAMERA  
Instructions  
Retain this information for future reference.  
Thank you for purchasing the JVC color video camera.  
Model No.  
To obtain the best results from your new camera, read these instructions carefully before use;  
Serial No.  
retain the manual for future reference.  
WARNING:  
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOIS-  
TURE.  
TK-C750/TK-C751  
(A)  
These instructions are for TK-C750U,TK-C750E and TK-C751EG  
Information for USA  
This device complies with Part 15 of the FCC Rules.  
Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.  
IMPORTANT SAFEGUARDS  
2. Save these instructions for later use.  
3. All warnings on the product and in the operating instructions should be adhered to.  
4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.  
Use a damp cloth for cleaning.  
1. Read all of these instructions.  
INFORMATION (FOR CANADA) RENSEIGNEMENT (POUR LE CANADA)  
This Class [B] digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.  
5. Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.  
6. Do not use this appliance near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet  
basement, or near a swimming pool, etc.  
PRECAUTIONS  
If an AGC switch is turned on, the sensitivity increases automatically in dark places. It is not a  
failure when the image looks grainy.  
7. Do not place this appliance on an unstable cart, stand, or table. The appliance may fall,  
causing serious injury to a child or adult, and serious damage to the appliance may fall,  
causing serious injury to a child or adult, and serious damage to the appliance.  
Use only with a cart or stand recommended by the manufacturer, or sold with the appliance.  
Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting  
kit approved by the manufacturer.  
PORTABLE CART WARNING  
(symbol provided by RETAC)  
Before mounting the camera, first mount the lens to be used with the camera, and then operate  
it in order to check the back focus.  
If a high-intensity object (such as a lamp) is in shot, the image on the screen may have vertical  
lines (smear) or blur (blooming) at its periphery (especially in AES mode).This is a characteristic  
of the CCD, and is not a defect.  
If a DC auto iris lens is used or if the appliance is operated under a fluorescent light, the automatic  
electronic switch (AES) should be set to OFF. If set to ON, flickering may occur. If a manual iris  
lens is used, set the AES to ON.  
When used in hot places, vertical lines may appear on the screen of this camera. This is a  
characteristic of the CCD and not a failure of the camera.  
The automatic tracking system may not function properly when shooting with non-standard  
lighting or lighting with a color temperature which exceeds the capability of the camera.  
If the camera subject is a single solid color (other than white), the auto white circuit will normally  
attempt to change this color to white. In the case of this camera, if it cannot make a correct  
prediction, the previous white balance setting will be maintained until the subject colors become  
more varied.  
An appliance and cart combination should be moved with care. Quick stops, excessive force,  
and uneven surfaces may cause the appliance and cart combination to overturn.  
8. Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to  
insure reliable operation of the appliance and to protect it from overheating, these openings  
S3125A  
must not be blocked or covered. The openings should never be blocked by placing the appliance on a bed, sofa,  
rug, or other similar surface. This appliance should never be placed near or over a radiator or heat register. This  
appliance should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.  
9. This appliance should be operated only from the type of power source indicated on the marking label. If you are  
not sure of the type of power supplied to your home, consult your dealer or local power company. For appliance  
designed to operate from battery power, refer to the operating instructions.  
10. This appliance system is equipped with a 3-wire grounding type plug (a plug having a third (grounding) pin).This plug  
will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the  
outlet, contact your electrician to replace your obsolete outlet.Do not defeat the safety purpose of the grounding plug.  
11. For added protection for this product during a lightning storm, or when it is left unattended and unused for long  
periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent  
damage to the product due to lightning and power-line surges.  
12. Do not allow anything to rest on the power cord. Do not locate this appliance where the cord will be abused by  
persons walking on it.  
13. Follow all warnings and instructions marked on the appliance.  
14. Do not overload wall outlets and extension cords as this can result in fire or electric shock.  
15. Never push objects of any kind into his appliance through cabinet slots as they mat touch dangerous voltage  
points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance.  
16. Do not attempt to service this appliance yourself as opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified service personnel.  
17. Unplug his appliance from the wall outlet and refer servicing to qualified service personnel under following conditions:  
a. When the power cord or plug is damaged or frayed.  
This unit assumes that the light source being used is either natural lighting (sunlight) or  
incandescent lamps (color temperature 2300 K-10000 K). Under special light sources, such as  
sodium lamps, colors may appear different compared to what is visible to the eye.  
Noise may appear in the picture and/or the colors may be incorrect if the camera is used near a  
radio or television transmitting antenna, in places where strong electromagnetic waves are  
generated by transformers, motors, etc., or near devices emitting radio waves, such as  
transceivers or cellular phones.  
This unit accepts only a DC iris lens.  
To save energy, be sure to turn off the system when not in use.  
A  
MOUNTING A LENS  
1. Before mounting a lens, check whether it is a C-mount or CS-mount lens.  
If a C-Mount lens is used, loosen the back-focus locking screw (M 2.6) using a Phillips  
head screwdriver, turn the back-focus adjusting ring with your fingers or the screw- B  
b. If liquid has been spilled into the appliance.  
c. If the appliance has been exposed to rain or water.  
d.If the appliance does not operate normally by following the operating instructions. Adjust only those controls that  
are covered by the operating instructions as improper adjustment of other controls may result in damage and  
will often require extensive work by a qualified technician to restore the appliance to normal operation.  
e. If the appliance has been dropped or the cabinet has been damaged.  
driver and change the mounting method.  
2. Dimension (b) of the lens shown in the illustration must be as shown in the table  
below. If (b) exceeds the value in the table, it may damage the inside of the camera  
or correct mounting may be impossible; never use such lenses. Do not attach a C-  
mount lens when using the CS-mount.  
f. When the appliance exhibits a distinct change in performance - this indicates a need for service.  
18. When replacement parts are required, be sure the service technician has used replacement parts specified by the  
manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire,  
electric shock, or other hazards.  
19. Upon completion of any service or repairs to this appliance, ask the service technician to perform routine safety  
checks to determine that the appliance is in safe operating condition.  
Lens  
Flange back (c)  
17.526 mm  
12.5 mm  
Dimension (b)  
10 mm or less  
5.5 mm or less  
C mount lens  
CS mount lens  
The F mark indicates a focal point.  
C  
1 3  
For USA and CANADA  
3. Mount the DC IRIS lens on the camera by turning the lens clockwise. Adjust its  
The lightning flash with arrowhead symbol,  
within an equi-lateral triangle, is intended to  
alert the user to the presence of uninsulated  
“dangerous voltage” within the product’s en-  
closure that may be of sufficient magnitude  
to constitute a risk of electric shock to per-  
sons.  
position.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
4. If the lens has an auto-iris mechanism, connect the lens cable after checking the pin  
assignment.  
Lens  
DC IRIS  
(does not contain EE amplifier)  
Pin No.  
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK.  
DO NOT REMOVE COVER (OR BACK).  
The exclamation point within an equilateral tri-  
angle is intended to alert the user to the pres-  
ence of important operating and maintenance  
(servicing) instructions in the literature ac-  
companying the appliance.  
+
+
1
2
3
4
Brake  
Brake  
Drive  
Drive  
NO USER SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
Voltage: 0.45 V – 4.05 V  
Current: max. 26 mA  
[
]
2 4  
*4 pin plug, service part number: SCV2859-001  
For details, please consult your JVC dealer.  
A
B
F
(b)  
CONNECTION  
1. When the camera is powered, the POWER LED lights up.  
CAMERA type  
power  
TK-C750U  
AC 24 V ` (class 2 only) or DC 12 V }  
TK-C750E  
AC 24 V ` (isolated power only) or DC 12 V }  
(c)  
TK-C751EG  
AC 220 V to 240 V  
`
(The power cable is 2500 mm in length.)  
EG only  
When you use this camera, the socket - outlet must be installed near the equip-  
ment to make disconnect on easily.  
(d)  
C
D
F
2. Connect to a video monitor, etc. (75 )  
3. When mounting the camera on a fixer, pan/tilt, etc., use the camera mounting screw  
hole (d) located on the camera-mounting bracket.  
IRIS  
D  
L
H
LEVEL  
COLOR VIDEO CAMERA  
CAUTION: Use a screw shorter in length than 7mm from the camera-mounting face.  
Furthermore, make use of the rotation prevention holes (e) to prevent the camera  
from falling and be sure to mount the camera securely.  
Special precautions must be taken when mounting the camera on a wall or a ceiling.  
JVC is not liable for any damage caused by incorrect installation.  
4. Installation of camera  
(e)  
w
• With the mounting plate on the underside  
q
E
This camera is originally designed to be mounted from underneath, as shown q. E  
IRIS  
The hole is standard photographic pan-head screw size (1/4-20 UNC, as is found  
in a typical camera fixing point or pan & tilt head.  
L
H
LEVEL  
COLOR VIDEO CAMERA  
4mm  
• With the mounting plate relocated to the topside  
Remove the CAMERA MOUNTING BRACKET (f) from the underside of the camera  
by removing the two fixing screws as shown w. Attach the CAMERA MOUNTING  
BRACKET (f) to the top, then mount the camera on the Fixing Unit as shown e.  
Make sure that two original screws are used when mounting the CAMERA  
MOUNTING BRACKET (f).Be sure to use a 6 mm long locking screw for the camera-  
mounting bracket.  
(f)  
MAX.  
7mm  
TK-C750  
These instructions assume the camera will only be mounted indoors.  
e
Fall Prevention  
Exercise maximum caution when installing the unit to a wall or ceiling. If in any doubt  
ask a professional to do the job, because if the unit were subsequently to fall, it could F  
result in personal injuries or accidents.  
When installing the unit on a fixer, turn table, etc., be sure to install it firmly and to  
use one of the rotation-preventing holes (e) provided.  
6mm  
IRIS  
As a failsafe against falling, attach the unit by chain, wire cable or other safety restraint to  
an appropriate anchor point. Attach the fall prevention wire using the black screw on the  
upper surface (TK-C751 : on the rear panel) of the camera as shown in figure F. When  
changing the side at which CAMERA MOUNTING BRACKET is installed, be sure to  
change the attachment side of the fall prevention wire also to the appropriate side.  
Specified screw (TK-C750 : M2.6 4 mm, TK-C751 : M3 6 mm )  
AES  
BLC  
ON-  
N-  
L
H
LEVEL  
OF  
O
O
COLOR VIDEO CAMERA  
AWB  
A
LL  
T
IN  
E
T
E
S
AS  
2mm  
PH  
T
E
S
E
R
E
W
O
P
UT  
O
N
L
O
E
TIO  
C
ID  
V
U
R
ST  
EE IN  
UA  
N
S
MA  
TK-C751  
Never use any screw longer than the specified length as the inside can be damaged.  
 

Indesit Washer Dryer IWDC 6125 User Manual
JBL Speaker System Media100 200 User Manual
John Deere Welding System AC G6010H User Manual
JVC DVD Player LVT2008 001B User Manual
JVC Home Theater System 0709WMKMDWJMM User Manual
JVC Speaker System SP XF30 User Manual
Kenmore Refrigerator 10645423800 User Manual
Kenmore Washer Dryer 26 88752 User Manual
Kodak Digital Photo Frame P87 User Manual
Koss Cordless Telephone JR 900 User Manual