Ives Door 7255J User Manual

Installation Instructions  
7255J  
Bottom Center Pivot  
Door leaf  
Jamb base  
plate  
1. Prepare and mortise bottom of door and floor to receive pivot set. Determine pivot location  
using dimensions on reverse side. Depth of mortise in the bottom of door will determine  
clearance. Be sure to properly locate and mark pivot center point of the base plate.  
2. Locate, drill, and tap 1/4-20 mounting holes for metal door. Locate and drill pilot holes for #14  
wood screws for wood door. Mount door leaf in bottom of door with 1/4-20 x 3/4” FHMS or #14  
FHWS screws provided.  
3. Locate, drill, and tap mounting holes for jamb base plate. Pivot point of top pivot set must  
be plumb with bottom pivot point. Attach jamb base to side jamb with mounting screws  
provided. Tighten securely.  
4. If using a threshold, install threshold at this time.  
5. Install top pivot set and hang door. Refer to top pivot set instructions.  
6. If vertical height adjustment is necessary, use shims between door bottom and pivot leaf to  
increase clearance. To decrease clearance, mortise in door must be made deeper.  
CAUTION  
!
Improper pivot set installation can lead to personal injury or property damage. Follow  
all instructions carefully. For questions contact Technical Support at 1-888-371-7331.  
26631 Rev. 4  
© 2006 Ingersoll-Rand Company Limited  
 

Ingersoll Rand Personal Lift 7790 A User Manual
Jackson Dishwasher 300X User Manual
Jacuzzi Hot Tub J 400 User Manual
JBL Professional Portable Speaker DPC 2 User Manual
Jensen Speaker XRS Series User Manual
JVC Camcorder 42PFL8803D User Manual
JVC Camcorder S3125A User Manual
Kenwood Car Satellite TV System DPX308U User Manual
Kidde Fire Extinguisher XL25MP User Manual
Knoll Stereo Amplifier 4K User Manual