Instant Hot Water Dispensers
Model
H770-SS
dispenser with easy-to-twist handle
The original instant hot water
The Next
Necessity
™
Specifications
Submittal Sheet
• Hot Only – Dispenses near-boiling 200°F
Capacity
2/3-gallon stainless
steel tank dispenses
60 cups of 200˚F
water per hour
• 35% more near-boiling water from larger
2/3-gallon stainless steel tank
• Easy to adjust temperature control
Electrical
120 volts A.C., 750
watts, 6.25 amp
heating element
with grounded
• Tool-free tank connections and dry start
protection to ease installation
three (3) prong plug
• Provides 60 cups/hr of near-boiling water
Thermostat
Snap-action,
adjustable from
160˚F to 210˚F
(factory pre-set
at 200˚F)
• 3-Year We Come To You™ In-Home
Service Warranty*
• 120 volts, 750 watts, 6.25 amps
• Available in chrome with black handle
Meets U.L. 94HF-1
flammabiltiy
specification
Insulation
Valve
Instant, self-closing
30-125 psi
Recommended
Supply Pressure
Dimensions
Minimum 2" required
from sink hole center
to backsplash
6-3/8
"
Shipping Weight
Approximately
7.4 lbs.
Sample Specification
Instant hot water dispenser(s) shall be
InSinkErator Model H770-SS with 2/3-
gallon stainless steel tank, adjustable
temperature from 160°F to 210°F and
instant, self-closing hot valve.
1-1/4" – 1-1/2"
standard sink hole
Required
Hole Diameter
4-3/8"
2-1/2"
1/4 Incoming
"
Water Supply
Inlet Tube
Flexible
Outlet Tube
Flexible
Vent Tube
Warranty:
3-year parts and in-home service.
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
11"
NOTE: Max counter thickness is 1".
US Pat. D532,497 (tank enclosure)
6-3/4"
6-1/8"
Job Specifications
The Emerson logo is a trademark and
service mark of Emerson Electric Co.
1-800-558-5700
InSinkErator is a division of
Emerson Electric Co.
HWD297-07B-45-10
Printed in USA
© 2007 InSinkErator
|